Before use, using the supplied software, configure the IP address, subnet mask, gateway, account information, SIP server details and monitor broadcast.
Description
The SIP wall speaker is a 10/100M network broadcast terminal that delivers audio received over the network though a high quality 15/30W speaker. It is waterproof, easy to install and provides crystal clear voice for public notification applications. In an emergency it can deliver a pre-recorded alarm message, trigger manually or via the LAN.
Installation
- Mount the Wall Speaker in a suitable internal environment.
- Connect Speaker to Powered Ethernet Cable OR attach power supply and unpowered Ethernet Cable but not both.
Fig 1. Ethernet and Power Connector
- Connect Ethernet Cable to Powered Switch
Fig 2 – Connect to Switch
Initial Configuration
- The Speaker needs to be on the same network as the Windows PC that you will initially configure.
Start up the Zone Controller Software and then click on Search
You will be presented with all the Speaker devices on the current local network.
Fig 3. – Search Grid
- Click on the Device to open edit window and select Network.
Fig 4 – Network Configuration
Select DHCP – Yes/No
If No, then enter IP Address, Subnet Mask, Gateway Address, Preferred and Secondary DNS. Click Update Device to save configuration to Speaker. If you are asked for password, the default is 1234.
- To Configure the SIP Account select SIP Config.
Fig 5 – SIP Configuration
Enter in Server IP, SIP Port, SIP User and SIP Password (Secret). Then Update Device.
The Speaker will restart.
To check the status of the connection to the SIP Server in the Search Grid.
Fig 6 – SIP Registration
For more details see ZoneController Administrator Manual
Product Features
- Network loudspeaker with audio decoding and a digital amplifier
- High speed dual-core CPU (ARM + DSP) boots in less than one second
- IP55 grade waterproof rating
- Metal enclosure with a fire dome
- Supports MP3, WMA, WAV and more
- Supports online firmware updates
- SIP account automatically joins calls
- Join up to 10 multicast groups at the same time
- Remote management and configuration
- PC-based IP audio management software platform
- Supports POE
Network Characteristics
This device supports the following features:
- SIP V1 (RFC2543) and V2 (RFC3261) network protocols
- DNS SRV (RFC3263), Static IP / DHCP
- VLAN (802.1pq), LLDP, VPN (L2TP/OPEN_VPN)
- Wideband G.722, narrowband G.711a/u and other audio codec protocols
- Compatible with mainstream sip servers, supports Internet applications